Single Sewage Pumping Station – 610mm x 1500mm 438 Litres – up to 10m head plus 2 year warranty on pump

Single Sewage Pumping Station – 610mm x 1500mm 438 Litres – up to 10m head plus 2 year warranty on pump

£579.00£728.00

Clear
Add to Wishlist
  • Description
  • Specification
  • Downloads
  • Delivery

Description

438 Litre Single Sewage Pumping Station – 610mm x 1500mm with 2 year warranty on pump

This pumping station is used for extensions, garden rooms, small conversions and for pumping sewage up to septic tanks and sewage treatment plants.

Sewage Pumping Station includes:

  • 450mm diameter 3.5 tonne Driveway Loading Cover
  • 110mm Inlet Seal
  • DAB FEKA VS750 Auto foul pump with 2 year warranty on pump or similar approved with integral float
  • Internal 2″ Pipework and Fittings including backwater valve
  • 610mm x 1500mm HDPE chamber
  • 63mm MDPE connector to connect to discharge pipework

Please note:

There must be a minimum of 450mm below the bottom of the inlet pipe to the base of the chamber to allow for the pump to operate.
This unit is supplied with a 110mm inlet seal to enable the inlet to be cut on site to your requirements.

Features of the Pumping Station:

  • 2 Year manufacturers warranty on pump
  • Stainless steel construction
  • Full 50mm solids handling capacity
  • Coolant filled motor
  • Mechanical seal
  • Non-clogging vortex impeller
  • 10 metres of cable
  • Float switch as standard
  • Suitable for connection to 63mm MDPE outlet pipe
  • 610mm diameter for easier installation in troublesome areas
  • Anti-flotation device helps to eliminate chamber from floating
  • Supplied with 110mm seal to allow inlet to be drilled on site
  • High water alarm available as optional extra
  • Job ready for easy installation

BCS0006 complies with the rules and regulations of the European Union, as well as other countries, regarding the use of plastic materials in food contact applications.

The information on the properties quoted are given as guidance. Buyers and users are advised of these facts so they can make their own assessment of our products under their own conditions when necessary.

The cost of delivery is included with this product, however offloading is the responsibility of the customer.

For more information please call 01773 767611.

All images are for illustration purposes only.

Sewage Pumping Station includes:

  • Dab Feka VS750 MA or similar approved with Integral Float complete with 2 year warranty on pump
  • 610mm x 1500mm polyethylene moulded chamber
  • 450mm diameter 3.5 tonne cover and frame (suitable for domestic driveway)
  • Internal 50mm PVC discharge pipe work
  • 63mm MDPE connector to connect to discharge pipework
  • 110mm Rubber Inlet Seal  (additional inlet seals can be purchased separately)

Specifications of the Pump:

  • Single phase, 50Hz, 240 Volts
  • 50mm NPT discharge with 50mm solids handling capacity
  • Suitable for connection to 63mm MDPE outlet pipe
  • Poly moulded basin with PSF cover
  • Integral foam seal
  • Stainless steel bolt kit

The cost of delivery is included with this product, however offloading is the responsibility of the customer.

You may also like…