The storage of fuel oil is strictly controlled in the UK and Ireland.
Tank owners are considered liable in law for any contamination or pollution caused on their or their neighbour’s property. It is therefore vital that the tank complies with legislation.
Prior to selecting a fuel oil storage tank, purchasers must complete a risk assessment for their particular installation and/or application to establish the type of oil storage tank permissible.
Once the type of tank has been established a further Fire Prevention assessment must be completed to establish the correct siting and positioning of the tank.
Finally, the tank must be installed in accordance with Balmoral’s Installation Instructions which are supplied with every tank (enclosed with the fittings) with respect to supporting the tank and expansion
clearances.
Overall requirements are specified in the following legislation:
• Control of Pollution (Oil Storage)(England) Regulations:2001
• Water Environment (Oil Storage)(Scotland) Regulations April 2006
• Control of Pollution (Silage, Slurry & Agricultural Fuel Oil) Regulations:1991
Fuel oil tanks supplying single family dwellings* must comply with:
• Building Regulations (England & Wales) 2002:AD”J”
• Scottish Building Standards (Domestic) Technical Handbook
• Building Regulations Northern Ireland Technical Booklet
L:2006
• Building Regulations: Part J (Ireland)
• BS5410 - Code of Practice for Oil Fired Systems: Part 1 or Part 2 (UK and Ireland)
Most of the requirements contained in the above legislation are covered by specifying and installing an integrally bunded tank.
The benefits of installing a bunded tank include peace of mind, flexibility of siting and potentially improved home insurance premiums.
To ensure your tank fully complies with the above, Balmoral strongly recommends that your tank is installed by an OFTEC engineer who is deemed to be competent in law. Alternatively, you can self install but must apply to your local Building Control Office for permission and inspection.
It is a requirement of Balmoral’s T&C’s and Warranty Policy that the tank purchaser complies with the requirements above.
If in doubt we recommend obtaining advice and information from a local representative of either the Environment Agency, the Irish Environment Protection Agency or the Scottish Environment Protection Agency.
Your Balmoral fuel oil tank is supplied with a 1”BSP (female) threaded outlet, pre-drilled holes with red protection plugs for locating 2”BSP (male) threaded filler and vent and a sealed lockable cover. Your Balmoral fuel oil tank is also supplied with a tank vent, a 2”BSP (male) threaded filler and a 2”BSP (female) threaded filler cap. All components are fitted during installation.
The following accessories are available in addition to the standard fittings kit:
• Balmoral Tankmaster and support bracket
• Balmoral sight gauge and support bracket
• Electonic level gauge
| 
