Septic tank filter to protect soakaway

Click for larger image

Price: £49.99 Inc VAT: £59.99 1 2 3 4 5 6 7 8 9 10

Description   Residential Water Filter The septic tank filter is installed to prevent solid matter being discharged into the soakaway. Every residential septic tank effluent filter includes a patented bypass protection sleeve to keep solids in the tank - where they belong. Your soakaway is an investment and will be protected it with the septic tank filter, and is designed to extend the life of the soakaway by up to 10 years. Easy to install and fit. The septic filter fits inside any 110mm underground drainage 'T' junction. Slide the filter cartridge into the filter sleeve. Lock the cartridge and sleeve together by holding the sleeve stationary and rotating the cartridge clockwise. Slide the assembled cartridge and sleeve into the 'T' junction at the tank’s outlet. Ensure the sleeve latch is pointing towards the outlet of the septic tank before filter placement into the tee. The soakaway is now protected from solids greater than 1.6mm. Allows only the clearest effluent from leaving the tank. Located in the sanitary 'T' junction, this filter extends beneath the scum layer, above the sludge layer, and withdraws effluent from the clear-water zone of the tank. Lowers maintenance costs: The filter can be serviced on a periodic basis by the homeowner to maintain peak performance. Under normal circumstances, the filter only requires servicing when the septic tank is pumped.  Allows the homeowner to monitor the condition of the tank: During routine maintenance, the tank should be inspected to be sure unnecessary particulate is not getting into your tank (i.e. fruit peelings, cigarette filters, feminine hygiene products, etc.). If sludge buildup becomes apparent on the bottom of your tank, then a more frequent pumping interval is suggested