Submersible pumps
Submersible sump pump for general waste water applications.
Automatic Waste Water / Sewage Lifting Unit
Complete single unit for above-floor installation.Automatic waste water lifting plant for above or below floor installations.
Waste water submersible Motor Pump
Submersible sump pump for general waste water applications, with up to 35mm solids handling.
Waste Water Submersible Motor Pump
Submersible sump pump for general waste water applications, with cooling jacket.
Submersible Motor Pump (non-flameproof)
Submersible pump for pumping waste containing solids or domestic sewage.
Submersible motor pumps without installation set (Ex and Non Ex version)
Submersible pump for heavy domestic and light municipal sewage and waste water applications.
Submersible sewage lifting units
Sewage lifting units, single or twin pump sets. For waste water and sewage application.
Small sewage lifting unit for single toilet.
Lifting unit for single system, fitted with cutter, integrated swing check valve and charcoal filter.
Prefabricated Pump Station
Automatic packaged pumping station with either single or twin pumps. For waste water and domestic sewage applications.
Automatic packaged pumping station with either single or twin pumps. Intelligent control system, no float switches required. For waste water and domestic sewage applications. ICS control or float switch control versions available.
End Suction Pumps
Close-coupled pump
Horizontal single-stage pump in close-coupled, end-suction design. For water supply, heating and cooling applications.
2900 RPM / 380-420V, 50 Hz, IP55, Class F, 3 Thermistors.
1450 RPM / 380-420V, 50 Hz, IP55, Class F, 3 Thermistors.
Long-Coupled horizontal single-stage pumps
For water supply heating/chilled water circulation.Horizontal single-stage pump in long coupled end-suction design. For water supply, heating and cooling applications.
Close-coupled pumps
316 Stainless steel for water supply (hot or cold), industrial water oils etc. Horizontal single-stage pump in close-coupled, end suction design. For industrial water, oils and aggressive liquid applications.
Motors 380-420 V, 50hz, IP55, Class F, 3 Thermistors.
Self-priming pumps
Horizontal, close-coupled, self priming pump for clean and grey water applications. Self priming.
Coolant / Transfer pumps
Liquid ring transfer pumps for industrial applications including pumping oil, cooling liquid, solvents, wash water in spray paint applications.
In-line pumps Circulator pumps with continuously variable differential pressure control.
Maintenance-free wet rotor pump (glandless, screw-ended) with integrated variable speed control. For heating circulation applications.
Circulator pumps with manual speed changeover.
Maintenance-free wet rotor pump (glandless, screw-ended). For heating circulation applications. Maintenance-free wet rotor pump, flanged or screw-ended, with four speed levels. For heating and air conditioning applications.
1.400 1/min, 1-230 V, 50 Hz(E) / 3-400 V, 50 Hz (D).
Hot water service pump
Maintenance-free wet rotor pump, screw-ended, with three speed levels. For hot water service applications.
2.800 1/min, 1-203 V, 50 Hz.
Glandless Circulator Pumps with manual speed changeover
Single & twin head in-line, glandless circulators with manual three speed control for heating and cooling applications.
Glandless Circulator Pumps with continuously variable speed control
Heating circulator with electronic speed control and IR interface for remote control. Complete with integral variable speed control.
Close-coupled in-line pumps
Pump and motor flanged together, with common shaft. Close-coupled, in-line glanded pump in single or twin head design. For use in heating, air conditioning and water supply applications.
In-line pumps
Glanded in-line pump for heating, air conditioning and water supply applications. Also available in alternative materials for more arduous applications.
In-line Twin Head pumps
Twin head, glanded in-line pump for heating, air conditioning and water supply applications. Also available in alternative materials for more arduous applications.
Borehole Pumps
Submersible Borehole pumps 100mm (4 inch)
100mm borehole pumps for delivery of clean or slightly contaminated water. For sprinkler, general water supply pressure boosting applications.
1 -220 – 240V 50 Hz
3-380 - 400 V 50 Hz
Multi – Stage & Booster pumps
Self priming multistage pumps
Multi-stage, self priming pump in close-coupled design for domestic water supply, irrigation and general water boosting applications.
Unit also available with control and monitoring unit.
Domestic Water Supply Systems
Multi-stage, self priming pump in close-coupled design for domestic water supply, irrigation and general water boosting applications. Complete with control and monitoring unit, accumulator and pressure switch.
Swimming Pool Pumps
Swimming pool recirculation pump with built-in filter for swimming pool applications.
5 inch Submersible Well Pumps
Submersible multistage pumps for general water supply and water boosting applications. Single phase and 3 phase units available.
High speed, multistage pumps
For general water supply, irrigation, boiler feed, water treatment. Boosting system.
3-230/400 V motor up to 2.2 kW, from 3 kW 3-400/692V
Single pump pressure boosting units
Fully automatic pressure boosting sets for water supply, fire fighting and general boosting applications.
Pressure boosting sets (2 to 6 pumps)
Step Control Units
Variable speed controlled units Fully automatic packaged pressure boosting sets with 2 to 6 pumps. For water supply, fire-fighting and general boosting applications.
