KSB Evamatic Box

Field of application

Waste water
Sewage
Greasy water
Rain water
Pumping of water lying under sewer level

Characteristics

Q : up to 40 m3/h, (11 l/s)
H : up to 21 m.
t° maxi : 40 °C. Occasionally 70°C (3 to 5 min.)
Solids passage : 45 to 60 mm

Designation

evamtic 02.JPG

Material of tanks

Water sealed box in high–density polyethylene

with PVC pipes.

Scope of supply

The Evamatic boxes are equipped with:

1 access cover Ø 530 mm

1 ventilation opening Ø 100 mm

1 inlet Ø 100 mm

1 or 2 discharge outlets DN 50 or 65 mm

– EN 12 050-1

Options :

Hand pump

Ball valve and valve kit.

Possible installation of a 250 mm extension piece

Alarm switchgear (Evamatic–Box twin pumping stations

only)

Motor

Single–phase a.c. motor 230 V – 50 Hz

with integrated overload protection.

Three–phase asynchronous motor 400 V – 50 Hz,

d.o.l. starting.

Motors IP 68, thermal class F to EN 60529 / IEC 529.

Advantages

Strong, stand alone, fully automatic system

Market leading product for domestic or commercial applications

Simple installation, either free standing or buried in the ground Supplied ready for installation

No clogging (Vortex or cutter impeller)

The pump must not be used in countries where pumps handling sewage with faeces are subject to explosion protection regulations.

evamtic 03.JPG

Evamatic-Box Single

– 1 box in high–density polyethylene with UV protection;

capacity 190 l.

– 1 cover Ø 530 mm.

– 2 sleeves Ø 100 with seal for inlet and ventilation.

– 1 kit for installation of the pump.

– 1 outlet cable + 1 male plug.

– 1 transportable submersible motor pump set

(Ama–Porter 5 – –, 6 – –, S 545) mounted on box bottom –

easy and quick dismantling.

– Float switch (on/off) mounted directly on the pump

Evamatic-Box Double

– 1 box in high–density polyethylene with UV protection;

capacity 500 l.

– 1 cover Ø 530mm.

– 2 sleeves Ø 100 with seal for inlet and ventilation.

– 2 discharge pipes in PVC nominal diameter 50/65.

– 1 set of outlet cable.

– 2 transportable submersible motor pumps sets

(Ama–Porter 5 – – NE, 5 – – ND, 6 – – NE, 6 – – ND ou S 545)

– 3 float switches for pump on/off control 2 for automatic

operating, 1 for high level alarm (alarm to order separatly)

– For all designs, 1 switchgear of series AC to standard

NF C 15.100.

Automatic operating mode

Evamatic-Box Single

Automation is ensured by the float switch (on/off) which is installed directly on the pump.

Evamatic-Box Double

Three float switches are installed inside the box at the levels NB, N1 and AL.