sales@drainstore.com
adrian@drainstore.com
cathy@drainstore.com
| Tel: 01773 767 611 / 01773 767 610 sales@drainstore.com adrian@drainstore.com cathy@drainstore.com |
|
Kiosks
The kiosks supplied by Drainstore are manufactured from 2mm zintec sheet steel to BS6687-1986 (chromate washed substrate BS1449-2.5 microns) The kiosks are press formed and welded construction and are supported by the appropriate certification to IP55 of BS5490 to give excellent weather protection and good earth continuity and finished to the following paint specification: 1. Degrease and clean to remove surface dirt 2. 1-coat of 2-pack etching primer 3. Air dry for 1-hour 4. 2-coats of pure polyester powder paint 5. Stove at 180 degrees for 45 minutes The finished colour is dark green shade RAL 6005 textured type finish, although other colours are available at extra cost. The kiosks are fitted with the following equipment as standard: - 1. 2-kiosk lifting brackets (Not applicable to smaller, non-standard kiosks. Unless requested) 2. 14mm floor fixings 3. Door retaining stay(s) to hold door(s) open at 90 degrees 4. Flush 7mm triangular door locks 5. Full height mounting rails at the rear of each section 6. Internal hinges 7. Earthing points Sizes available Kiosk reference Height Width Depth Doors
Cat Flap Yale type lock Wooden backboard - per door Please call Adrian or Cathy on 01773 767611 for prices and availability. Please ensure the terms and conditions of contract are read and fully understood prior to any order. |
|
| Copyright © Drainstore 2010. Web design by 7Soft.co.uk Units 1 & 2 , Heanor Gate Road , Heanor Gate Industrial Park , Heanor , Derbyshire, DE75 7RJ, United Kingdom Show Map |
