Kiosk - 1250mm x 1250mm x 400mm - 1 door
Excl. Tax: £479.00 Incl. Tax: £574.80
Manuf part number: 601688


The kiosks supplied by Drainstore are manufactured from 2mm zintec sheet steel to BS6687-1986 (chromate washed substrate BS1449-2.5 microns)
The kiosks are press formed and welded construction and are supported by the appropriate certification to IP55 of BS5490 to give excellent weather protection and good earth continuity and finished to the following paint specification:
1.      Degrease and clean to remove surface dirt
2.      1-coat of 2-pack etching primer
3.      Air dry for 1-hour
4.      2-coats of pure polyester powder paint
5.      Stove at 180 degrees for 45 minutes
The finished colour is dark green shade RAL 6005 textured type finish, although other colours are available at extra cost.
The kiosks are fitted with the following equipment as standard: -
1.      2-kiosk lifting brackets (Not applicable to smaller, non-standard kiosks. Unless requested)
2.      14mm floor fixings
3.      Door retaining stay(s) to hold door(s) open at 90 degrees
4.      Flush 7mm triangular door locks
5.      Full height mounting rails at the rear of each section
6.      Internal hinges
7.      Earthing points
Kiosk reference      Height           Width             Depth              Doors
DS3                       1250mm        1250mm       400mm              1
Optional Extras

Cat Flap
Yale type lock
Wooden backboard - per door
Please ensure the terms and conditions of contract are read and fully understood prior to any order.