Drainstore Single Effluent Pumping Station - 610mm Dia x 635mm Deep. 190 litre capacity.

Click for larger image

Description Single Effluent or Rainwater Pumping Station The 610 mm x 635 mm – Single Drainer pumping station is a pre-assembled, ready to use package pumping station suitable for the handling of clean, grey or effluent water. Suitable for Removing Grey Water From  Final Effluent from Sewage Treatment Plant Drainage of Cellars & Basements Sinks, Showers, Kitchens & Dishwashers Nuisance Water Surface Water Drainage Product Specification 610 mm (Dia) x 635 mm (High) MDPE TANK 190 Litre Total Capacity 450 mm (Dia) Screw-Down 3.5 Tonne Driveway Rated Cover Multiple 110 mm Inlets Available Available For Immediate Delivery 1. 450 mm (Dia) Screw-Down 3.5 Tonne Driveway Rated Cover 2. 110 mm Inlet 3. Telka 44 Pump With Integral Float 4. 1¼" Pipework and Fittings Please note - There must be 450mm below the bottom of the inlet pipe to allow for the pump to operate. Should this not be available you can purchase risers and an additional lid to suit. Alternatively you should consider a deeper chamber - Please call for further details or assistance. A 635mm  B 610mm  C The invert for the tank can either be pre-drilled to the customers own requirements, or we would be able to supply the inlet seal for you to cut your own inlet on site   Effluent pumping stations include: 1 x. 610 mm diameter x 635 mm deep HDPE chamber. 1 x. 32 mm automatic (NON SOLIDS) handling pump. 1 x. non-return valve/gate valve. 1 x. 450 mm (Dia) Screw-Down 3.5 Tonne Driveway Rated Cover An alarm is recommended for this unit. The invert for the tank can either be pre-drilled to the customers own requirements, or we would be able to supply the inlet seal for you to cut your own inlet on site. The total capacity of the tank is 190 litres. This system uses 32 mm MDPE and fittings, click here for full details and costs. Larger tank sizes are available. Please call 01773 767611 for further details. Pump curve For full details of the pump using this application click the pdf link below.

telka_44_pump_for_drainstore_effluent_pumping_stations.pdf - 54kb Download this file

single_rigged_effluent_pumping_station_610x635_layout.pdf - 102kb Download this file